Samsung WF53BB8900ADUS Repair

Samsung WF53BB8900ADUS is a Bespoke front-load washer with a 5.3 cu ft drum, current. It sits one step beside the Samsung WF53BB8700AVUS in our lineup, so owners often compare the two. The prefix tells you that both load from the front; the rest of the string tells us which build you own.

Below are the points that most often bring owners of a washer this size to book a visit.

Three jobs the washer does between wash and spin

Between filling and spinning, the machine senses its load, adds water, drains and checks balance. When one of these steps goes wrong the cycle appears to freeze. A washer that sits with water in the drum may be waiting on a drain. One that sits dry may be waiting on water. One that hums but will not accelerate may be failing balance checks. Each case sends us to a different part, and knowing which stage it stopped at is the most useful thing you can tell us.

Spin trouble

If the drum will not spin or the spin is weak, clothes finish soaked. Look for a heavy single item, then check the drain. If both are fine, the motor, its control, or a bearing is the next subject. The motor code page explains the motor alert. Do not touch the drum while it moves.

Water supply

A slow fill often comes from a partly closed valve or a clogged inlet screen. We check that both hoses are connected to the right taps, because swapped hot and cold can trigger an alert described on the hot and cold hose page. Turn the taps fully, run a short rinse, and watch whether water arrives at a steady pace.

What to avoid

Do not force a locked door, do not pour liquid into the drum cabinet seams, and do not run a leaking washer to see how bad it gets.

More on this washer type

Our Samsung washer repair page and the Samsung washers guide fill in the rest. For a wet floor, read water stays in the drum.

Frequently asked questions