Samsung Dishwasher 1C Error Code
1C is a low-water level check code on Samsung dishwashers with digital displays.
Specialized Samsung Appliance Repair in San Francisco
Mon–Sat: 8:00 AM – 7:00 PM
A control panel that beeps, sticks or ignores the Start button often points at moisture or a pressed key.
This is a current Samsung dishwasher, so we describe it by type; check the label for the exact configuration. People who own it tend to contact us about the panel: lights that do not respond, options that select themselves or a cycle that never begins.
Dishwashers watch their keys constantly. If one seems held down, the unit reports a button fault, described on the 6C stuck button page. A longer press is on the bC2 page, and an unresponsive or erratic panel is on the bC3 page. Wiping a wet cloth over the front, or steam rising from a vent after a hot cycle, is a frequent trigger.
A unit that powers up but stops soon after pressing Start may be reporting a door check, covered on the DC page, or a supply issue. A communication fault between the panel and the main board is on the CE page.
The technician tests the latch, the panel response and the board communication, and compares them with the code you noted. If a panel or board is the cause, the written estimate names it and you decide.
Under-counter units in rentals are sometimes powered through a cord and switched outlet beneath the sink. A loose plug or a switched circuit that was turned off can look exactly like a dead panel. Check that first.
Dishwasher controls sit near the top of the door, where steam collects when the door is opened at the end of a hot cycle. Over time, damp air can reach the keys and the electronics behind them. Opening the door slowly, letting steam escape and keeping cleaning sprays away from the panel are simple habits that protect it. If a fault has already appeared, avoid pressing keys repeatedly, since that only confuses the diagnosis; note the order in which lights come on instead.
Visit Samsung dishwasher repair and dishwashers. If the machine runs but the soap tray stays shut, read detergent pod not dissolving.
A key may be held down or the panel may have collected moisture. Drying the panel and resetting power once often clears it.
Check the door latch, the plug or switch under the sink and the breaker. If all look right, book a diagnosis.
That points to moisture or a board fault. Do not spray cleaner on the panel.
Yes, it identifies the control and parts layout. It is usually on the door edge or inside the tub frame.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.