VERIFIED
Heating errors in short
HC, hE, HC4 and 1 HC all report a heating problem. According to Samsung, the dryer is generally running too hot, though sometimes the heater fails to get hot enough. They are listed for dryers without model limits.
Do these first
- Empty and wipe the lint screen.
- Clear the exhaust vent system as well; a blocked screen or vent is the leading cause, since it keeps heat from escaping.
- With an electric model, weak voltage can stop the heater reaching temperature, which is why Samsung tells owners to bring in an electrician to test the supply.
- A code that keeps returning calls for a service request.
Notes from the UK and heat-pump lists
Samsung UK describes HC and HE as the compressor running too hot. It suggests looking at the home breaker panel for tripped breakers and resetting them, and cleaning the lint filter. Anything involving the heating element wiring is for a professional electrician, after the dryer is unplugged.
The Russian heat-pump list offers three explanations for HC: the dryer was connected to power incorrectly, the lint filter or heat exchanger filter is dirty, or several drying cycles ran in a row.
Codes to compare
- HC2: gas ignition.
- nC2: the inner heat exchanger cover.
- Fil-tEr: a buzzer reminder to clean the heat exchanger.
Samsung dryer repair in San Francisco and nearby
If a heating code returns once the lint screen and vent are clean, dial (415) 969-6153 to ask about Samsung dryer repair in the Bay Area. Say which code appears, the model number, whether it is gas or electric, and what you cleaned.
Model compatibility: Samsung reuses codes across series and model years, so HC / hE / HC4 / 1 HC may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
